Radyne MM200 Technical Information

MM200 High Speed Microwave Modem Installation and Operation Manual TM086 - Rev. 4.1 Comtech EF Data • 2114 W 7t

Table of Contents MM200 High-Speed Microwave Modem TM086 - Rev. 4.1 x 4.29 Server Host Name ______________________________________________ 4-46 4

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-1 Remote RLLP A When new features are added to Radyne equipment, the contro

Appendix A MM200 High-Speed Microwave Modem A-2 TM086 – Rev. 4.1 configuration Query Mod Tx Enable 0x2054 Returns the carrier enable status Que

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-3 Command Repeater Mode 0x220D Selects the repeater mode Command Mod Frequenc

Appendix A MM200 High-Speed Microwave Modem A-4 TM086 – Rev. 4.1 A.3 Detailed Command Descriptions Opcode: <0x2000> Query Identificati

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-5 <1> Second 0 – 59 Opcode: <0x2010> Query current summary al

Appendix A MM200 High-Speed Microwave Modem A-6 TM086 – Rev. 4.1 <2> Demod Summary Fault Bit 0 = Demodulator Fault Bit 1 = Demodulator chan

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-7 Query Response <1> <1> <1> <1> <

Appendix A MM200 High-Speed Microwave Modem A-8 TM086 – Rev. 4.1 Query Response <1> <1> <1> Selected channel number

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-9 <1> <1> Channel Major Alarm Mask Channel Minor Alarm Ma

MM200 High-Speed Microwave Modem Table of Contents TM086 - Rev. 4.1 xi 5.11.3 DS03 15-pin female HD ‘D’ sub connector (J9) _______________________

Appendix A MM200 High-Speed Microwave Modem A-10 TM086 – Rev. 4.1 Query Response <1> <1> <1> <1> <1>

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-11 <2> <4> <4> Utilization Bandwidth APC Minimum Tx Leve

Appendix A MM200 High-Speed Microwave Modem A-12 TM086 – Rev. 4.1 <1> <1> <1> <1> <1> <1>

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-13 <4> <4> <4> <4> <1> <1>

Appendix A MM200 High-Speed Microwave Modem A-14 TM086 – Rev. 4.1 <1> <1> <1> <1> <1> <1>

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-15 <1> <1> <1> <1> <1> <1&

Appendix A MM200 High-Speed Microwave Modem A-16 TM086 – Rev. 4.1 Query Response <1> <1> <1> <1> <2> <2&

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-17 <4> <4> <4> <4> <4> <4> &

Appendix A MM200 High-Speed Microwave Modem A-18 TM086 – Rev. 4.1 Bit 7 = Track fault status Opcode: <0x20B2> Query a selected demodulat

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-19 <1> <1> <4> <4> <4> &l

Table of Contents MM200 High-Speed Microwave Modem TM086 - Rev. 4.1 xii Section 6 - Maintenance and Troubleshooting ...

Appendix A MM200 High-Speed Microwave Modem A-20 TM086 – Rev. 4.1 <1> <1> <1> <1> <1> <1>

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-21 <4> <1> <1> <1> <1> <1>

Appendix A MM200 High-Speed Microwave Modem A-22 TM086 – Rev. 4.1 <1> <2> <1> <1> <1> <1> <1>

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-23 <1> <1> <1> <1> <1> <1&g

Appendix A MM200 High-Speed Microwave Modem A-24 TM086 – Rev. 4.1 <1> <1> <4> APC Control APC Hysteresis APC Level Sets the

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-25 <4> <2> <4> <2> Status Max Payload Utilizatio

Appendix A MM200 High-Speed Microwave Modem A-26 TM086 – Rev. 4.1 <1> Reserved 5 = T1E1 6 = DSO 7 = PAR 8 = OC3 9 = HSSI

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-27 <1> <1> <1> <1> <1> <1>

Appendix A MM200 High-Speed Microwave Modem A-28 TM086 – Rev. 4.1 <4> <4> <1> <1> &l

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-29 <1> <1> <1> <1> Reserved Interface PRBS

MM200 High-Speed Microwave Modem Introduction TM086 - Rev. 4.1 1-1 Introduction 1 1.0 Description The Radyne MM200 Microwave Modem is a high-sp

Appendix A MM200 High-Speed Microwave Modem A-30 TM086 – Rev. 4.1 <1> Reserved 4 = T3E3 5 = T1E1 6 = DSO 7 = PAR 8 = O

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-31 <1> <1> Minor Alarm1 Status Interface

Appendix A MM200 High-Speed Microwave Modem A-32 TM086 – Rev. 4.1 <1> <1> <1> <1> <1> <

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-33 Bit 5 - 7 = Spare Opcode: <0x2162> Query selected Rx interface conf

Appendix A MM200 High-Speed Microwave Modem A-34 TM086 – Rev. 4.1 <1> <1> <1> <1> <1> <1>

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-35 <1> <1> <1> <1> I

Appendix A MM200 High-Speed Microwave Modem A-36 TM086 – Rev. 4.1 <1> Selected interface number 0 = interface1 1 = interface2 2 = interface

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-37 Opcode: <0x2208> Command set common alarm mask Command Data <1>

Appendix A MM200 High-Speed Microwave Modem A-38 TM086 – Rev. 4.1 Opcode: <0x2242> Command modulator symbol rate Command Data <4> S

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-39 Opcode: <0x2255> Command modulator carrier mode Command Data <1&g

Introduction MM200 High-Speed Microwave Modem 1-2 TM086 - Rev. 4.1

Appendix A MM200 High-Speed Microwave Modem A-40 TM086 – Rev. 4.1 <1> Channel Minor Alarm Mask Bit 2 - 7 = Spare 0 = Mask, 1 = Allow

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-41 <1> <1> <1> <1> <1> <1>

Appendix A MM200 High-Speed Microwave Modem A-42 TM086 – Rev. 4.1 <1> Demodulation 0 = qam4 1 = qam16 2 = qam32 3 = qam64 4 = qam128 5 = qa

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-43 Opcode: <0x229B> Command demodulator bandwidth Command Data <4&g

Appendix A MM200 High-Speed Microwave Modem A-44 TM086 – Rev. 4.1 Bit 4 = Sync lock status Bit 5 = FIFO reload Status Bit 6 = FIFO pos status Bit

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-45 <1> <1> <1> <1> <1> <1>

Appendix A MM200 High-Speed Microwave Modem A-46 TM086 – Rev. 4.1 <1> Byte Gap 3 = interface4 0 = Burst Mode, 1..255 = Byte Gap

MM200 High-Speed Microwave Modem Appendix A TM086 – Rev. 4.1 A-47

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-1 SNMP MIB B MM200-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises

MM200 High-Speed Microwave Modem Installation TM086 - Rev. 4.1 2-1 Installation 2 2.0 Installation Requirements The MM200 is designed to be ins

Appendix B MM200 High-Speed Microwave Modem B-2 TM086 – Rev. 4.1 -- ----------------------------------------------------------------------------

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-3 DESCRIPTION "Selects IF user 2 frequency in Hz." ::=

Appendix B MM200 High-Speed Microwave Modem B-4 TM086 – Rev. 4.1 DESCRIPTION "Inverts the direction of rotation for the modulati

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-5 DESCRIPTION "Minor Alarm 1 mask:

Appendix B MM200 High-Speed Microwave Modem B-6 TM086 – Rev. 4.1 radMM200TxMinorAlarm1Status OBJECT-TYPE SYNTAX AlarmByteType MAX-ACCES

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-7 Bit 7 = Spare 0 = Pass,

Appendix B MM200 High-Speed Microwave Modem B-8 TM086 – Rev. 4.1 "MM200 Tx channel non-volatile status structure" INDEX {

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-9 RadMM200TxChannelStatusEntry ::= SEQUENCE { radMM200TxChannelInde

Appendix B MM200 High-Speed Microwave Modem B-10 TM086 – Rev. 4.1 Bit 3 = FIFO empty status

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-11 radMM200TxInterfaceMajorAlarmMask INTEGER, radMM200TxInterfaceMin

Installation MM200 High-Speed Microwave Modem 2-2 TM086 - Rev. 4.1 2.2 Removal and Assembly If using a knife or cutting blade to open the carton,

Appendix B MM200 High-Speed Microwave Modem B-12 TM086 – Rev. 4.1 smpt19(15) smpt38(16) } MAX-ACCESS read-write

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-13 ::= { radMM200TxInterfaceNVStatusEntry 11 } radMM200TxInterfacePRBS OB

Appendix B MM200 High-Speed Microwave Modem B-14 TM086 – Rev. 4.1 radMM200TxInterfaceStatusEntry OBJECT-TYPE SYNTAX RadMM200TxInterfaceSta

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-15 radMM200TxInterfaceLatchedMinorAlarmStatus OBJECT-TYPE SYNTAX AlarmByte

Appendix B MM200 High-Speed Microwave Modem B-16 TM086 – Rev. 4.1 radMM200RxIFUser3Frequency OBJECT-TYPE SYNTAX INTEGER (50000000..9000000

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-17 ::= { radMM200DemodNVStatus 10 } radMM200RxChannelSetting OBJECT-TYPE

Appendix B MM200 High-Speed Microwave Modem B-18 TM086 – Rev. 4.1 0 = Mask, 1 = Allow" ::= { radMM200DemodNVS

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-19 "Major Alarm 1 status. The agent initializes t

Appendix B MM200 High-Speed Microwave Modem B-20 TM086 – Rev. 4.1 radMM200RxLatchedMajorAlarm2Status OBJECT-TYPE SYNTAX Al

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-21 MAX-ACCESS read-only STATUS current

MM200 High-Speed Microwave Modem Installation TM086 - Rev. 4.1 2-3 2.4.1 Initial Power-Up Before initial power up of the MM200, it is a good idea

Appendix B MM200 High-Speed Microwave Modem B-22 TM086 – Rev. 4.1 Bit 5 = FIFO reload Bit 6

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-23 DESCRIPTION "Minor Alarm status:

Appendix B MM200 High-Speed Microwave Modem B-24 TM086 – Rev. 4.1 radMM200RxChannelSNR OBJECT-TYPE SYNTAX INTEGER (0..100)

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-25 radMM200RxInterfaceDataInvert INTEGER, ra

Appendix B MM200 High-Speed Microwave Modem B-26 TM086 – Rev. 4.1 parallelDVB(10), parallelM2P(11), oc3(12), stm1

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-27 MAX-ACCESS read-write STATUS current

Appendix B MM200 High-Speed Microwave Modem B-28 TM086 – Rev. 4.1 Bit 0 = Interface FIFO full

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-29 MAX-ACCESS read-only STATUS current

Appendix B MM200 High-Speed Microwave Modem B-30 TM086 – Rev. 4.1 t3e3(4), t1e1(5), ds0(6), parallel(7),

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-31 radMM200CommonAlarm1Mask OBJECT-TYPE SYNTAX AlarmByteType MAX-ACCES

Installation MM200 High-Speed Microwave Modem 2-2 TM086 - Rev. 4.1

Appendix B MM200 High-Speed Microwave Modem B-32 TM086 – Rev. 4.1 radMM200CommonLatchedAlarm1Status OBJECT-TYPE SYNTAX AlarmByteType MA

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-33 STATUS current DESCRIPTION

Appendix B MM200 High-Speed Microwave Modem B-34 TM086 – Rev. 4.1 "Modulator channel non-volatile status group.&qu

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-35 radMM200RxMinorAlarm2Mask } STATUS current DESCRIPTION

Appendix B MM200 High-Speed Microwave Modem B-36 TM086 – Rev. 4.1 radMM200RxInterfaceDataInvert, radMM200RxInterfaceTerrestrialLo

MM200 High-Speed Microwave Modem Appendix B TM086 – Rev 4.1 B-37 } STATUS current DESCRIPTION "Modulator traps group.&qu

Appendix B MM200 High-Speed Microwave Modem B-38 TM086 – Rev. 4.1

MM200 High-Speed Microwave Modem Glossary TM086 – Rev. 4.1 G-1 Glossary G A A Ampere AC Alternating Current ADC Analog to Digital Conver

Glossary MM200 High-Speed Microwave Modem G-2 TM086 – Rev. 4.1 D DAC Digital to Analog Converter dB Decibels dBc Decibels Referred to Carrier

MM200 High-Speed Microwave Modem Glossary TM086 – Rev. 4.1 G-3 H HSSI High Speed Serial Interface HW Hardware Hz Hertz (Unit of Frequency)

MM200 High-Speed Microwave Modem Theory of Operation TM086 - Rev. 4.1 3-1 Theory of Operation 3 3.0 Theory of Operation The MM200 Microwave Mode

Glossary MM200 High-Speed Microwave Modem G-4 TM086 – Rev. 4.1 N NC Normally Closed NO Normally Open ns Nanoseconds NVRAM Non-Volatile Rando

MM200 High-Speed Microwave Modem Glossary TM086 – Rev. 4.1 G-5 T TBD To Be Designed or To Be Determined TM Technical Manual TPC Turbo Prod

Glossary MM200 High-Speed Microwave Modem G-6 TM086 – Rev. 4.1

Theory of Operation MM200 High-Speed Microwave Modem 3-2 TM086 - Rev. 4.1 Figure 3-1. MM200 Microwave Modem Block Diagram 3.1.2 Data Muxiplexer

MM200 High-Speed Microwave Modem Theory of Operation TM086 - Rev. 4.1 3-3 Data is always evenly divided between the number of channels selected i.e.

Theory of Operation MM200 High-Speed Microwave Modem 3-4 TM086 - Rev. 4.1 6. Modem should lock with SNRs > 32 dB. 3.2.2 Sample Setups 3.2.2.

MM200 High-Speed Microwave Modem Theory of Operation TM086 - Rev. 4.1 3-5 This section is not yet complete. 3.3 Calculating 3dB Bandwidth of MM200

Theory of Operation MM200 High-Speed Microwave Modem 3-6 TM086 - Rev. 4.1

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-1 User Interfaces 4 4.0 User Interfaces There are four user interfaces avail

User Interfaces MM200 High-Speed Microwave Modem 4-2 TM086 - Rev. 4.1 4.1.1 Front Panel LCD Display The front panel display is a 2 line by 16-cha

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-3 4.1.4 Front Panel LED Indicators There are 12 LEDs on the MM200 front panel

User Interfaces MM200 High-Speed Microwave Modem 4-4 TM086 - Rev. 4.1 4.2 Front Panel Control Screen Menus The Front Panel Control Screen Menus a

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-5 4.3.2 MODULATOR (menu) * The Modulator Menu Screens are listed below: Scree

MM200 High-Speed Microwave Modem Warranty Policy TM086 - Rev. 4.1 iii Warranty Policy WP Comtech EF Data products are warranted against defects i

User Interfaces MM200 High-Speed Microwave Modem 4-6 TM086 - Rev. 4.1 4.3.3 DEMODULATOR (menu) The Demodulator Menu Screens are listed below: Sc

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-7 ACQ CONTROL ACQ BW (kHz) ACQ DELAY (sec)

User Interfaces MM200 High-Speed Microwave Modem 4-8 TM086 - Rev. 4.1 MONITOR (menu): MUX STATUS FIFO A STATUS FIFO B STATUS

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-9 RECEIVE (menu): RCV CONTROL LEVEL (dBm) HYSTERESIS MONITOR (menu):

User Interfaces MM200 High-Speed Microwave Modem 4-10 TM086 - Rev. 4.1 CLK POLARITY DATA INVERT BB LOOP VOLUME PIDs on a f

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-11 JIT CONTROL NULL PID CLK POLARITY DATA INVERT

User Interfaces MM200 High-Speed Microwave Modem 4-12 TM086 - Rev. 4.1 PRESS CLR TO CENTER BUFFER VOLUME BYTE GAP Centers the buffer.

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-13 operating frequency width, or the individual channel frequency if the System

User Interfaces MM200 High-Speed Microwave Modem 4-14 TM086 - Rev. 4.1 Screen Name Selections and Descriptions L0 L1 L2 FREQUENCY (Hz) {50 – 90

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-15 ACQ CONTROL ACQ BW (kHz) ACQ DELAY (se

Warranty Policy MM200 High-Speed Microwave Modem iv TM086 - Rev. 4.1 iv Before a warranty repair can be accomplished, a Repair Authorization must be

User Interfaces MM200 High-Speed Microwave Modem 4-16 TM086 - Rev. 4.1 TRACKING STEP (Hz) {10 – 100 Hz} Sets the step size that the demodulator

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-17 4.4.4 REPEATER (menu) The Repeater Menu Screen is listed below: Screen Nam

User Interfaces MM200 High-Speed Microwave Modem 4-18 TM086 - Rev. 4.1 The primary Tx Interface Screens and their sub-menus as listed below: Scree

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-19 VOLUME implemented, for future expansion. {0 - 255} Allows the user to s

User Interfaces MM200 High-Speed Microwave Modem 4-20 TM086 - Rev. 4.1 4.4.6 RX INTERFACE (Menu) The primary Rx Interface Screens and their sub-m

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-21 TERR LOOP BUFF ENABLE CLK SOURCE CLK FREQ BUFF DEPT

User Interfaces MM200 High-Speed Microwave Modem 4-22 TM086 - Rev. 4.1 TX ENABLED INSTALLED CHs OFF, ON} Displays TX Power Control Status

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-23 OFFST FRQ1 OFFST FRQ2 OFFST FRQ3 OFFST FRQ4 INSTALLED CHs Displ

User Interfaces MM200 High-Speed Microwave Modem 4-24 TM086 - Rev. 4.1 EVENT BUFF {Empty, Number of events} Displays the number of events that has

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-25 MDD1 PLLLOCK MDD2 PLLLOCK MDD3 PLLLOCK {Masked, Unmasked} RF PLL no

MM200 High-Speed Microwave Modem Preface TM086 - Rev. 4.1 v Preface P This manual provides installation and operation information for the Radyne R

User Interfaces MM200 High-Speed Microwave Modem 4-26 TM086 - Rev. 4.1 MAJOR DMX (menu) DMX HW FPGA INT0 HW FPGA INT2 HW FPGA INT3 HW

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-27 TRACK FAULT CHANNEL 2 (menu) CHANNEL 3 (menu) CHANNEL 4 (menu)

User Interfaces MM200 High-Speed Microwave Modem 4-28 TM086 - Rev. 4.1 MINOR INT2 (menu) MINOR INT3 (menu) MINOR INT4 (menu) Buffer cloc

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-29 ALL ALARMS {No, Yes} Used for dispersive fading analyzer testing. RW RW RW DA

User Interfaces MM200 High-Speed Microwave Modem 4-30 TM086 - Rev. 4.1 FW4459-- FW4459-- Firmware Version Firmware Date RO RO RO RO RO RO 4.4

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-31 4.5.1 Protocol Structure When new features are added to Radyne Inc. equip

User Interfaces MM200 High-Speed Microwave Modem 4-32 TM086 - Rev. 4.1 The format and structure of the COMMSPEC message exchanges are described her

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-33 00h + 02h + F0h + 2Ah + 09h + 00h + 03h + DFh + FEh = 305h. Since the only

User Interfaces MM200 High-Speed Microwave Modem 4-34 TM086 - Rev. 4.1 4.5.4 Global Response Operational Codes In acknowledgment response packets

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-35 REMOTE_PID_ERROR 0x0211 REMOTE_DATA_RATE_ERROR 0x0212 REMOTE_INTERFACETYPE_

Preface MM200 High-Speed Microwave Modem TM086 - Rev. 4.1 vi Product names mentioned in this manual may be trademarks or registered trademarks of

User Interfaces MM200 High-Speed Microwave Modem 4-36 TM086 - Rev. 4.1 REMOTE_SYMBOLRATE_PERCHANNEL_LO_ERROR 0x0235 REMOTE_SYMBOLRATE_PERCHANNEL_H

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-37 DMD - 4500/5000 Demodulator Section 09 RCU - 5000 M:N Switch 10 DMD15 Modul

User Interfaces MM200 High-Speed Microwave Modem 4-38 TM086 - Rev. 4.1 4.5.7 RLLP Summary The RLLP is a simple send-and-wait protocol that automa

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-39 4.9 Mgmt {internet 2} 1.3.6.1.2 This area was reserved to describe

User Interfaces MM200 High-Speed Microwave Modem 4-40 TM086 - Rev. 4.1 Figure 1. Object Identifiers in the Management Information Base (Sheet 2 o

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-41 Figure 1. 1. Verify that your emulation software is set to the following:

User Interfaces MM200 High-Speed Microwave Modem 4-42 TM086 - Rev. 4.1 4.15 SNMP Option 1. From the Main Menu, select ‘20’ for Network Configura

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-43 Security Controls Screen: 1.Main Menu 2.Control Mode : TERMINAL 12.

User Interfaces MM200 High-Speed Microwave Modem 4-44 TM086 - Rev. 4.1 Security User Logon Password Authentication Password Privacy Password Ini

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-45 2. In the New Password Text Box, enter the new password (case sensitive, onl

MM200 High-Speed Microwave Modem Table of Contents TM086 - Rev. 4.1 vii Table of Contents ToC Warranty Policy ...

User Interfaces MM200 High-Speed Microwave Modem 4-46 TM086 - Rev. 4.1 3. Re-enter the new password to verify desired setting. 4. Select OK 4.

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-47 This section refers to the Boot Host. 1. Select 36, ‘Server Host Name’. En

User Interfaces MM200 High-Speed Microwave Modem 4-48 TM086 - Rev. 4.1 4.35 Trace Mode 1. For debugging purposes, a trace mode is specified by

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-49 Group Context/Community Security Level Read Access Write Access NULL mi

User Interfaces MM200 High-Speed Microwave Modem 4-50 TM086 - Rev. 4.1 4.42 Ping Program 1. PING is an application that uses the ICMP protocol t

MM200 High-Speed Microwave Modem User Interfaces TM086 - Rev. 4.1 4-51 4.43 SNMP Test 1. Once it is determined that the MM200 is reachable, compi

User Interfaces MM200 High-Speed Microwave Modem 4-52 TM086 - Rev. 4.1

MM200 High-Speed Microwave Modem Electrical Interfaces TM086 - Rev. 4.1 5-1 Electrical Interfaces 5 5.0 MM200 Connections All MM200 connections

Electrical Interfaces MM200 High-Speed Microwave Modem 5-2 TM086 - Rev. 4.1 Refer to Table 5-1 below for pinouts for optional DC Power plug. Table

MM200 High-Speed Microwave Modem Electrical Interfaces TM086 - Rev. 4.1 5-3 5.3 Terminal Port (I/O) The Terminal Port (J2) can be used for the mon

Table of Contents MM200 High-Speed Microwave Modem TM086 - Rev. 4.1 viii 3.2.2 Sample Setups __________________________________________________ 3-

Electrical Interfaces MM200 High-Speed Microwave Modem 5-4 TM086 - Rev. 4.1 5.4.1 Remote Port Cabling for a Standard Computer RS-232 COM Port A ca

MM200 High-Speed Microwave Modem Electrical Interfaces TM086 - Rev. 4.1 5-5 6 +TX 1 +TX 8 -RX 13 -RX 9 +TX 3 +TX 7 to 12 +RX CLK to +TX C

Electrical Interfaces MM200 High-Speed Microwave Modem 5-6 TM086 - Rev. 4.1 5.9 Interface Slots 1 Through 4 Several Rear Panel Interfaces are avai

MM200 High-Speed Microwave Modem Electrical Interfaces TM086 - Rev. 4.1 5-7 5.11 Overhead/DS0 Audio Rear Panel Interface This rear panel interface

Electrical Interfaces MM200 High-Speed Microwave Modem 5-8 TM086 - Rev. 4.1 Table 5-7. Channels 2 – 8 (Female 15-pin HD ‘D-Sub’)

MM200 High-Speed Microwave Modem Electrical Interfaces TM086 - Rev. 4.1 5-9 5.11.7 DS07 15-pin female HD ‘D’ sub connector (J13) Provides Channel

Electrical Interfaces MM200 High-Speed Microwave Modem 5-10 TM086 - Rev. 4.1 5.13 ASI Rear Panel Interface This rear panel interface (Figure 5-6)

MM200 High-Speed Microwave Modem Electrical Interfaces TM086 - Rev. 4.1 5-11 5.14.2 OUT Female BNC Connector (J16) Provides E1 Data Output from th

Electrical Interfaces MM200 High-Speed Microwave Modem 5-12 TM086 - Rev. 4.1 5.15.1 PARALLEL TX 25-pin female ‘D’ sub connector (J15) Provides RS-

MM200 High-Speed Microwave Modem Electrical Interfaces TM086 - Rev. 4.1 5-13 5.15.2 PARALLEL RX 25-pin female ‘D’ sub connector (J16) Accepts RS-4

MM200 High-Speed Microwave Modem Table of Contents TM086 - Rev. 4.1 ix 4.4.8.2 Latched Alarms _______________________________________________ 4-28

Electrical Interfaces MM200 High-Speed Microwave Modem 5-14 TM086 - Rev. 4.1 5.16 Parallel LVDS/DVB, M2P This rear panel interface provides Parall

MM200 High-Speed Microwave Modem Electrical Interfaces TM086 - Rev. 4.1 5-15 5.16.2 PARALLEL RX 25-pin female ‘D’ sub connector (J16) Accepts RS-4

Electrical Interfaces MM200 High-Speed Microwave Modem 5-16 TM086 - Rev. 4.1 5.16.4 CLK IN Female BNC Connector (J18) Accepts the Reference Clock

MM200 High-Speed Microwave Modem Electrical Interfaces TM086 - Rev. 4.1 5-17

MM200 High-Speed Microwave Modem Troubleshooting and Maintenance TM086 - Rev. 4.1 6-1 Maintenance and Troubleshooting 6 6.0 Periodic Maintenance

Troubleshooting and Maintenance MM200 High-Speed Microwave Modem 6-2 TM086 - Rev. 4.1 Note: If a terminal is available it is easier to view all the

Troubleshooting and Maintenance MM200 High-Speed Microwave Modem 6-4 TM086 - Rev. 4.1

MM200 High-Speed Microwave Modem Technical Specifications TM086 - Rev. 4.1 7-1 Technical Specifications 7 7.0 Introduction This section defines

Technical Specifications MM200 High-Speed Microwave Modem 7-2 TM086 – Rev. 4.1 7.3 Optional Data Interfaces G.703 T3, E3 or STS-1* DVB ASI (no

Technical Specifications MM200 High-Speed Microwave Modem 7-2 TM086 - Rev. 4.1